Brand:SCB10
SCB10 30-2500kVA/10kV Resin Cast Dry Type Transformer is a self-developed according to Germany MORA technique by our company with high safety & protecting environment.Compared to SCB9, both on-load loss and no-load loss have decreased by more than 10%. When forced air cooling is used, the output capacity of the transformer can be increased by 50%. They are used in bad environment for high fireproof, heavy load motion and dirty damp. Such as airport, power plant, hospital, Uptown, nuclear power plant, etc. especial and important site.
- Installation height: altitude not exceeding 1000m;
- Ambient temperature: maximum temperature +40℃; The maximum daily average temperature is +30℃; Maximum annual average temperature +20℃; Minimum temperature -25C(for indoor transformer).
|
GB1094.11-2007 |
GB1094.3-2003 |
|
GB/T10228-2008 |
JB/T10088-2004 |
|
GB/T17211-1998 |
JB/T56009-1998 |
1. This series transformer is compared with the SCB9 series lower loss and lower noise.
2. Safety, fireproofing, non-polluter, directly used in load center.
3. High mechanical strength.
4. Low loss, low noise, the obviously save energy, free from the maintenance.
5. Strong ability of spreading hot and loading, and which they will be raised the capacity while forcing the breeze.
6. Good function of defending moisture which make they suitable for in high degree of humidity and other bad environments.
7. Providing with the perfect temperature examination and the protection systems and adopting the intelligence signal temperature control system, can monitor and cruise back to show automatically the each work temperature of three-phase winding series: furthermore, can start automatically, stop the breeze machine, and report to the police to jump.
8. Small size, light weight, little covering space, low expenses.
9. Low-pressure coil that structure is foil type rounded by high-quality copper, the high- pressure coil that structure is layer type by the vacuum iron oxygen molded.
10. The iron core is made of high-quality silicon steel sheets, and its structure is of the full mitered lap joint type.
|
Rated Capacity (kVA) |
Voltage |
Vector Group |
No-Load Loss (W) |
120℃ On-Load Loss (W) |
Short cirait-z (%) |
No-Load Cur (%) |
Main Unit W.T (kg) |
Shuck W.T (kg) |
Size(mm) |
Distance (mm) |
|||
|
V (kV) |
Chng (%) |
V (kV) |
L·W·H (Without Protective Cover) |
L·W·H (With Protective Cover) |
|||||||||
|
30 |
6 6.3 10 10.5 11 |
±5 Or 2×2.5 |
0.4 |
Yyn0 Or Dyn11 |
190 |
710 |
4 |
2.4 |
310 |
395 |
670×500×695 |
1050×900×1000 |
350×450 |
|
50 |
270 |
1000 |
2.4 |
385 |
430 |
670×500×755 |
1050×900×1050 |
350×450 |
|||||
|
80 |
370 |
1380 |
1.8 |
475 |
535 |
930×600×785 |
1300×1000×1100 |
550×550 |
|||||
|
100 |
400 |
1570 |
1.8 |
590 |
660 |
990×600×800 |
1350×1050×1150 |
550×550 |
|||||
|
125 |
470 |
1850 |
1.6 |
665 |
745 |
1030×600×820 |
1400×1050×1150 |
550×550 |
|||||
|
160 |
540 |
2130 |
1.5 |
750 |
840 |
1040×710×940 |
1400×1100×1200 |
660×660 |
|||||
|
200 |
620 |
2530 |
1.4 |
880 |
985 |
1090×710×960 |
1450×1100×1300 |
660×660 |
|||||
|
250 |
720 |
2760 |
1.4 |
1000 |
1120 |
1110×710×1050 |
1500×1100×1350 |
660×660 |
|||||
|
315 |
880 |
3470 |
1.2 |
1150 |
1325 |
1150×710×1100 |
1550×1100×1450 |
660×660 |
|||||
|
400 |
980 |
3990 |
1.2 |
1410 |
1580 |
1250×710×1205 |
1650×1150×1500 |
660×660 |
|||||
|
500 |
1160 |
4880 |
1.2 |
1575 |
1760 |
1280×870×1290 |
1650×1250×1650 |
820×820 |
|||||
|
630 |
1340 |
5880 |
6 |
1.0 |
1950 |
2180 |
1320×870×1380 |
1700×1300×1700 |
820×820 |
||||
|
630 |
1300 |
5960 |
1.0 |
1750 |
1960 |
1370×870×1220 |
1750×1300×1650 |
820×820 |
|||||
|
800 |
1520 |
6960 |
1.0 |
2030 |
2300 |
1390×870×1360 |
1750×1300×1700 |
820×820 |
|||||
|
1000 |
1770 |
8130 |
1.0 |
2350 |
2650 |
1440×870×1460 |
1800×1300×1800 |
820×820 |
|||||
|
1250 |
2090 |
9690 |
1.0 |
2780 |
3100 |
1520×870×1580 |
1900×1350×1900 |
820×820 |
|||||
|
1600 |
2450 |
11730 |
1.0 |
3250 |
3640 |
1590×870×1630 |
2000×1500×1950 |
820×820 |
|||||
|
2000 |
3050 |
14450 |
0.8 |
3830 |
4310 |
1660×1120×1790 |
2000×1500×2100 |
1070×1070 |
|||||
|
2500 |
3600 |
17170 |
0.8 |
4350 |
4880 |
1760×1120×1910 |
2100×1500×2200 |
1070×1070 |
|||||
Note:
1. Load loss in the table below the diagonal values for Dyn11 connection group of products.
2. Technical parameters of 10kV distribution transformer for large capacity, size and weight data, please contact us.Can provide various rate voltage, short circuit impedance, vector group according to the user demand.
3. The weight and dimensions provided in the table are for reference only. For detailed specifications, please contact us.
Q: How long is the delivery time?
A: Normal within 10 days. It depends on detail items and quantity.Please contact us for details.
Q: How to get product quotation?
A: You can contact us anytime through the contact information on the website. You will receive our response within 24 hours.
Q: What after-sales services can I enjoy?
A: The transformer comes with a one-year warranty. Long-term online technical support is provided, along with customer training, and regular updates to maintenance manuals and technical guides.
Q: How long is the average lifespan of a transformer?
A: The lifespan ranges from 20 to 40 years, influenced by factors such as maintenance level, operating environment, and load conditions.
Q: How to determine the parameters of the transformer?
A: We can usually find the parameters in transformer nameplates, drawings, outline drawings, and technical tables.
Q: Do you have oil-immersed transformers and dry-type transformers in stock?
A: No, as transformers require customized parameters based on demand, we usually need to design them after receiving an order.
http://www.lvma-transformer.com/